What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 00:24

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is where the MOV conducts again, and dissipated the energy.
The other is “what does a “fuse” do?”
What is the best sex you have ever had (in detail)?
This is 'the assistant's answer'
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The third is lightning and “how it gets conducted into a home.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
The MOV will conduct when the voltage exceeds 50% of line voltage.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Barnstars:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
(Dc diagram shown, AC is similar).
Is it legal for an employer to ask why you are taking time off from work?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
These devices are installed between the “hot” and “neutral” and protective ground.
He then asserts :
Tahini Is The High Protein Food You Can Eat Every Day—With Almost Everything - Vogue
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
I post the exact comment here.
What do you do when you are struggling to fall asleep?
This device then solves the entire problem.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
eight
These are simplified answers to the original question, and does not change anything I wrote above.
Because the load is inductive, the current lags the voltage.(by a bit).
First American Spacewalk 60 Years Ago Today - The Weather Channel
The bolt then partially travels down the line to your home.
Here is a simplified AC power diagram.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Who are the archers in Genesis 49:23?
He then describes Rainy Season and Lightning.
what exactly is a ‘surge’ protector?
What is lightning?
Who is the dumbest law enforcement officer you have ever encountered?
At one ohm, the resistor has a maximum of 1 watt power.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
For this case there are devices called Metal oxide varistors (MOV).
Saquon Barkley unveiled as ‘Madden NFL 26’ cover star with famous backwards hurdle - New York Post
It also is a device that limits the change in current flow.
An AC voltage/ current source, and an ac inductive load.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Cryptocurrency Platform Gemini Confidentially Files for IPO - PYMNTS.com
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–16 [ OO OLAOYE OYEBODE ]
40 Father’s Day Gifts He’ll Wanna Brag About - BuzzFeed
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
so, what happens?
2024–10–14 [Omar Gharbi Omar Gharbi ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is where this question deviates from being a 'generic' question, and becomes more specific.
[image of Common-mode choke]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
[old diagram got deleted by accident]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
but this device (an Inductor) … impedes the rapid changes in the current.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What does a fuse do?
One is “what exactly is in a ‘surge protector’ ? ”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
the problem then depends on "how fast does the fuse operate?".
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
But it can get overloaded, and no longer works.
nine
There are two important concepts here.
This one hit behind the barn.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
It seems Mohan does not understand the difference between a comment and an Answer.
Now when you have a certain ac resistance, then a current flows in a loop.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
So, the voltage could go up to 500 volts, and the fuse will not open up.
A fuse is a non-resetable over current circuit protector.
Edit 2024–10.
There are three different concepts here that are getting confused.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
At least they know the answer if they wanted it.
In schematic diagrams this is the symbol for a fuse:
but I think this circuit , shows a few more pieces.
A circuit breaker is similar, but is resettable.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes the function of a fuse.
a photo is worth a thousand words.
Upvotes:
2024–10–10[John johnson John Johnson ]
One
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But… the neutral is now “floating” because of the 1 ohm resistance.
First Sentence: